Industrial

Industrial Test Tools

GW Instek GPT-12000 Series Safety Electrical Analyzer (200VA Output)

GPT-12004_F_19081210550.jpg New (200VA output capacity) safety analyzer, which is the first safety analyzer in the world to comply with IEC 61010-2-034 , which stipulates that the requirements of the software and hardware interfaces must be followed while designing high voltage and insulation resistance test and measurement instruments.

Fluke 417D Laser Distance Meter

F-417d_20b.jpg New Fluke 417D is accurate, durable, and easy to use—just point and shoot. The simple design and easy, one-button measurement operation allows you to minimize time spent measuring and maximize the reliability of measurements.

ชุดเครื่องมือช่างไฟฟ้ามืออาชีพคุณภาพ Germany จาก FLUKE

Fluke_IKPK7.jpg New ช่างซ่อมบำรุงไฟฟ้ามืออาชีพเช่นคุณ ต้องการเครื่องมือช่างระดับความปลอดภัยสูงสุด คุณภาพใช้งานดีที่สุด ไม่สร้างความเสียหายให้กับอุปกรณ์ไฟฟ้าในระบบ และทำให้งานเสร็จเร็วอยู่ใช่ไหม?

GW Instek PFR-100 Series, Programmable DC Power Supply (Fanless)

PFR-1.jpg New The PFR-100 series is a power supply with a five-fold rated power that allows users to self-define voltage and current under rated power conditions so as to satisfy them with wider voltage and current operational ranges. PFR-100 series, with rated 100W, provides two models: PFR-100L- maximum output voltage of 50V (at 2A) or maximum output current of 10A (at 10V); PFR-100M maximum output voltage of 250V (at 0.4A) or maximum output current of 2A (at 50V).

GW Instek PSU Series Programmable DC Power Supply (High Power)

PSU_Front.jpg PSU_rear.jpg The PSU-series provides maximum 2 units in series connection (models under 300V) to achieve maximum 600V or 4 units in parallel connection to obtain maximum 800A and the maximum output power of 6.24 kilowatts.

GW Instek GLC-9000 Leakage Current Tester

GLC-9000_17020315555.jpg leakage current tester, is used to perform leakage current tests on general purpose electric (IEC 60990) equipment. This tester engages with nine measurement networks to provide the simulation of human body while the EUT is taking a leakage current testing in compliance with the specific standards or regulations such as IEC, UL, JIS...etc.

Prodigit 3310G Series DC Electronic Load

<3310G.jpg ◌ The new Turbo mode is designed for overload or protection testing, which includes OCP, OPP, Short for AC/DC or DC / DC power source ; Over Charge / Discharge and Short for Battery BMS protection; and Blow / Not Blow testing for Fuse, Breaker or PTC Current Protection Components.
◌ Support Short, OCCP and OCDP protection tests for battery BMS protection testing, the peak current before protection and protection response time are measured.

Prodigit 5310 AC Power Supply

5310.jpg ◌ Voltage output has totally six ranges,maximum up to 500V,convenient for 300V above the voltage regulation test.
◌ Built-in IEC61000-4-11 specification, can simulate the surge, trap, instantaneous off; just set the output voltage and frequency to complete the IEC 61000-4-11 test.

Prodigit 4016 AC/DC Digital Power Analyzer

4016_AC_DC_Digital_Power_Analyzer.jpg The 4016 is a new generation digital power analyzer designed specifically for single channel AC/DC power measurement. Oscilloscope function of 4016 digital power analyzer for using many kinds of measurements such as harmonic distortion, It can directly capture the waveforms, values and can provide the harmonic values, the graphics amplitude of each harmonic, providing highly accurate and convenient power measurement.